Demodulation Subsystem - Agilent Technologies N9340B Programmer's Manual

5 Command Reference

DEMOdulation Subsystem

62
This sub tree commands are used to control the
demodulation after the measure has been loaded by
[:SENSe]:FREQuency:SPAN:ZERO.
AM Demodulation
:DEMod:AM:STATe OFF|ON|0|1
:DEMod:AM:STATe?
This command toggles AM demodulation function between
on and off.
*RST:
Off
Key access: SPAN > Demod > AM (On)
FM Demodulation
:DEMod:FM:STATe OFF|ON|0|1
:DEMod:FM:STATe?
This command toggles FM demodulation function between on
and off.
*RST:
Off
Key access: SPAN > Demod > FM (On)
N9340B Programmer's Guide