Table of Contents
Advertisement
Command Reference
5
Power on Type
:SYSTem:CONFigure:PORT REF|TRIGger
:SYSTem:CONFigure:PORT?
This command toggles the channel for external input
between reference and trigger signal.
Key access:
SYS > Input/Output > Ext Input Trig/Ref
Restart
:SYSTem:POWer:RESet
Use this command to restart the instrument.
Power Off
:SYSTem:POWer:OFF
Use this command to power off the instrument. This
command has the same effect as Power hardkey on the front
panel.
Low Frequency Channel
:SYSTem:CHANnel OFF|ON|0|1
:SYSTem:CHANnel?
Use this command to switch the signal channel to low
frequency channel.
Screen save
:SYSTem:FILE:SAVE SCReen
Use this command to capture the instrument screen into the
pre- defined saving path.
N9340B Programmer's Guide
93
Advertisement
Table of Contents
