Table of Contents
Advertisement
N9340B Programmer's Guide
Marker Peak Search
:CALCulate:MARKer[1]|2|3|4|5|6:MAXimum
Performs a peak search based on the search mode settings
of :CALCulate:MARKer[1]|2|3|4|5|6:FUNCtion
FCOunt|NOISe|OFF.
Key access:
Marker > Peak Search > Peak
Marker Peak Left/Right Search
:CALCulate:MARKer[1]|2|3|4|5|6:MAXimum:LEFT
:CALCulate:MARKer[1]|2|3|4|5|6:MAXimum:RIGHt
Places the selected marker on the next highest signal peak
to the left/right of the current marked peak.
Key access:
Marker > Peak Search > Next Left\Right PK
Marker Mode
:CALCulate:MARKer[1]|2|3|4|5|6:MODE POSi-
tion|DELTa|OFF
:CALCulate:MARKer[1]|2|3|4|5|6:MODE?
Selects the type of markers that you want to activate.
Position selects a normal marker that can be positioned
on a trace and from
generated.
Delta activates a pair of markers, one of which is fixed at
the current marker location. The other marker can then be
moved around on the trace. The marker readout shows the
difference between the two markers.
Off turns the designated marker off.
Remarks:
If a marker is not active when the mode is queried, "Off"
will be returned.
Key access:
Marker > Normal/Delta/Off
Command Reference
which trace information will be
5
59
Advertisement
Table of Contents
