Unit Subsystem - Agilent Technologies N9340B Programmer's Manual

5 Command Reference

UNIT Subsystem

100
Select Power Units of Measure
:UNIT:POWer DBM|DBMV|DBUV|DBUA|V|W|A
:UNIT:POWer?
Specifies amplitude units for the input, output and display.
*RST:
dBm in log amplitude scale
Volts in linear amplitude scale
Key access: AMPTD > More > Y Axis
EMF Mode
:UNIT:POWer:EMF ON|OFF|1|0
:UNIT:POWer:EMF?
This command toggles the EMF mode between on and off.
EMF mode is available when the Y Axis Unit is dBmV, dBμV
or V. This mode is used to measure the port voltage in open
circuit.
*RST:
Off
Key access: AMPTD > More > EMF Mode
N9340B Programmer's Guide