Table of Contents
Advertisement
INSTrument Subsystem
N9340B Programmer's Guide
The instrument subsystem includes commands for querying
and selecting the measurement modes.
Instrument Mode
:INSTrument[:SELect] SA|TGENerator|DANalyse|POW-
ermeter
:INSTrument[:SELect]?
This command selects the instrument mode. CONFigure
subsystem commands used for measurements in the MEAS
menus.
*RST:
SA
Key access:
MODE
Power Measurement
:INSTrument:MEASure OFF|CHPower|ACPR|OBW|SEM
:INSTrument:MEASure?
This command selects the specific power measurement mode.
When you select the specific measurement mode, the
MEASure subsystem commands are available for the further
measurement.
CHPower - Channel Power Measurement
ACPR - Adjacent Channel Power Ratio Measurement
OBW - Occupied Bandwidth Measurement
SEM - Spectrum Emission Mask
Key access:
MEAS
Command Reference
5
67
Advertisement
Table of Contents
