Agilent Technologies N9340B Programmer's Manual page 64

5 Command Reference
58
Frequency Counter Marker
:CALCulate:MARKer[1]|2|3|4|5|6:FCOunt[:STATe]
OFF|ON|0|1
:CALCulate:MARKer[1]|2|3|4|5|6:FCOunt[:STATe]?
Turns on/off the marker frequency counter. To query the
frequency counter, use
:CALCulate:MARKer[1]:FCOunt:X? If the specified
marker number is not the active marker, it becomes the
active marker. If the specified marker number is not on, it is
turned on and becomes the active marker. A 1 is returned
only if marker count is on and the selected number is the
active marker.
*RST:
Off
Remarks:
If a frequency count x value is generated when the
frequency count state is off, then 0 is returned.
Key access: Marker > More > Mode > Freq Count
Marker Function
:CALCulate:MARKer[1]|2|3|4|5|6:FUNCtion
FCOunt|NOISe|OFF
:CALCulate:MARKer[1]|2|3|4|5|6:FUNCtion?
This command selects the marker function for the designated
marker.
FCOunt refers to the frequency counter function.
NOISe refers to the noise measurement function.
OFF refers to the normal function.
*RST:
1 kHz
Key access: Marker > More > Mode
N9340B Programmer's Guide