Table of Contents
Advertisement
Default Unit:
N9340B Programmer's Guide
Remarks:
Free- run activates the trigger condition that allows the next
sweep to start as soon as possible after the last sweep.
Key access:
SPAN > Trigger > Free Run|Video|Ext Rise/Fall
Video Trigger Level Amplitude
:TRIGger[:SEQuence]:VIDeo:LEVel <ampl>
:TRIGger[:SEQuence]:VIDeo:LEVel?
Specifies the level at which a video trigger will occur. Video
is adjusted using this command, but must also be selected
using the command :TRIGger[:SEQuence]:SOURce
VIDeo.
*RST:
2.5 divisions below reference level
Range:
10 display divisions below reference level to reference level
current amplitude units
Key access:
SPAN > Trigger > Video
Trigger Delay Time
:TRIGger[:SEQuence]:DELaytime <time>
:TRIGger[:SEQuence]:DELaytime?
Specifies trigger delay time for video or external trigger
signal.
*RST:
6 μs
Key access:
SPAN > Trigger > Video
Command Reference
5
99
Advertisement
Table of Contents
