Table of Contents
Advertisement
5
Command Reference
SYSTem Subsystem
92
This subsystem is used to set the controls and parameters
associated with the overall system communication. These
functions are not related to instrument performance.
Set Time
:SYSTem:TIME <hh>,<mm>,<ss>
:SYSTem:TIME?
Sets the time of the real- time clock of the instrument.
Hour must be an integer 0 to 23.
Minute must be an integer 0 to 59.
Second must be an integer 0 to 59.
Key access:
SYS > Setting > General > Time/Date > Time
Set Date
:SYSTem:DATE <mm>,<dd>,<yyyy>
:SYSTem:DATE?
Sets the date of the real- time clock of the instrument. Year
is a 4- digit integer. Month is an integer 1 to 12. Day is an
integer 1 to 31 (depending on the month)
Key access:
SYS > Setting > General > Time/Date > Date
Error Information Query
:SYSTem:ERRor[:NEXT]?
This command queries the earliest entry to the error queue
and then deletes that entry. *CLS clears the entire error
queue.
Key access:
SYS > More > Show Errors
N9340B Programmer's Guide
Advertisement
Table of Contents
