Table of Contents
Advertisement
Connecting the N9340B to a PC via the USB Port
N9340B Programmer's Guide
No extra driver is required to connect the N9340B via the
USB port to a PC. All you need is the Agilent IO libraries
suite and you can find this IO libraries suite in the
documentation CD in the shipment along with your N9340B.
Or download the IO libraries suite from Agilent website:
http://www.agilent.com/find/iolib
Refer to the following steps to finish the connection:
1
Install Agilent IO libraries suite on your PC
2
Switch on the N9340B
3
Connect the analyzer to a PC with a USB cable.
Connecting PC
Connecting instrument
Getting Started
1
3
Advertisement
Table of Contents
