Agilent Technologies N9340B Programmer's Manual page 66

5 Command Reference
60
Marker to Center
:CALCulate:MARKer[1]|2|3|4|5|6[:SET]:CENTer
This command sets the center frequency equal to the
specified marker frequency, which moves the marker to the
center of the screen. In delta marker mode, the center
frequency is set to the marker delta value. This command is
not available in zero span.
Remarks:
This command is just available in Spectrum Anlayzer and
Tracking Generator mode.
Key access: Marker > Marker To > To Center
Marker On/Off
:CALCulate:MARKer[1]|2|3|4|5|6:STATe OFF|ON|0|1
:CALCulate:MARKer[1]|2|3|4|5|6:STATe?
This command toggles the selected marker status between on
and off.
Key access: Marker > Normal/Off
Marker to Trace
:CALCulate:MARKer[1]|2|3|4|5|6:TRACe <integer>
:CALCulate:MARKer[1]|2|3|4|5|6:TRACe?
This command assigns the specified marker to the
designated trace 1, 2, 3 or 4.
*RST:
1
Key access: Marker > More > Marker Trace
Marker readout: X value
:CALCulate:MARKer[1]|2|3|4|5|6:X <para>
:CALCulate:MARKer[1]|2|3|4|5|6:X?
This command positions the designated marker on its
assigned trace at the specified trace X value.
N9340B Programmer's Guide