Table of Contents
Advertisement
Command Reference
5
The value is in the X- axis units, which can be a
frequency or time.
The query returns the current X value of the designated
marker.
*RST:
Off
Key access:
Marker > Normal
Marker readout: Y Value
:CALCulate:MARKer[1]|2|3|4|5|6:Y?
This command reads the current Y value for the designated
marker or delta on its assigned trace. The value is in the
Y- axis units for the current trace.
This command can be used to read the results of marker
functions such as and noise that are displayed in the marker
value field on the analyzer.
N9340B Programmer's Guide
61
Advertisement
Table of Contents
