Agilent Technologies N9340B Programmer's Manual page 83

N9340B Programmer's Guide
Set the Sweep Time
:MEASure:SEMask:OFFSet:LIST:SWEeptime <time> ...
[<time>] (up to five values)
:MEASure:SEMask:OFFSet:LIST:SWEeptime?
:MEASure:SEMask:OFFSet:LIST:SWEeptime:AUTO
OFF|ON|0|1,...OFF|ON|0|1 (up to five values)
:MEASure:SEMask:OFFSet:LIST:SWEeptime:AUTO?
Specifies the sweep time for the currently offset, and toggles
this function between Auto and Manual for each offset.
*RST:
Dependent upon Offset selected, please refer to the User's
Guide for more details.
Range:
5 ms to 4 ks
Example:
:MEAS:SEM:OFFS:LIST:SWE:AUTO 40 ms
Key access: MEAS > Spectrum Emission Mask >Offset/Limits >Sweep Time
Set the Abs Start
:MEASure:SEMask:OFFSet:LIST:STARt:ABSolute
<ampl>,...[<ampl>] (up to five values)
:MEASure:SEMask:OFFSet:LIST:STARt:ABSolute?
Enables you to enter an absolute level limit at Start Freq for
the currently selected offset ranging from –200.00 to +50.00
dBm with 0.01 dB resolution.
*RST:
Dependent upon Offset selected, please refer to the User's
Guide for more details.
Range:
–200 dBm to 50 dBm
Example:
MEAS:SEM:OFFS:LIST:STAR:ABS –20 dBm
Key access: MEAS > Spectrum Emission Mask > Offset/Limits > More > Abs Start
Set the Rel Start
:MEASure:SEMask:OFFSet:LIST:STARt:RCARrier
<ampl>,...[<ampl>] (up to five values)
Command Reference 5
77