Table of Contents
Advertisement
DISPlay Subsystem
N9340B Programmer's Guide
The DISPlay subsystem controls the selection and
presentation of textual, graphical, and trace information.
Within a display, information may be separated into
individual windows.
Trace Y-Axis Scaling
:DISPlay:WINDow:TRACe:Y[:SCALe]:PDIVision
1|2|5|10
:DISPlay:WINDow:TRACe:Y[:SCALe]:PDIVision?
This command sets the per- division display scaling for the
y- axis when scale type of Y axis is set to Log.
*RST:
10 dB
Range:
1, 2, 5 or 10
Key access:
AMPTD > Scale/DIV
Trace Y-Axis Reference Level
:DISPlay:WINDow:TRACe:Y[:SCALe]:RLEVel:OFFSet
<ampl>
:DISPlay:WINDow:TRACe:Y[:SCALe]:RLEVel:OFFSet?
This command sets the amplitude value of the reference
level for the Y- axis.
*RST:
0 dB
Range:
–120.00 to +30.00 dBm
Key access:
AMPTD > Ref Level
Command Reference
5
63
Advertisement
Table of Contents
