Agilent Technologies N9340B Programmer's Manual page 94

5 Command Reference
Default Unit:
Default Unit:
88
Frequency Span
[:SENSe]:FREQuency:SPAN <freq>
[:SENSe]:FREQuency:SPAN?
Set the frequency span. Setting the span to 0 Hz puts the
analyzer into zero span.
*RST:
3.0 GHz
Hz
Key access: FREQ > Span|Zero Span
Full Frequency Span
[:SENSe]:FREQuency:SPAN:FULL
Set the frequency span to full scale.
*RST:
3.0 GHz
Key access: FREQ > Full Span
Last Frequency Span
[:SENSe]:FREQuency:SPAN:PREVious
Set the frequency span to the previous span setting.
Key access: FREQ > Last Span
Start Frequency
[:SENSe]:FREQuency:STARt <freq>
[:SENSe]:FREQuency:STARt?
Set the start frequency.
*RST:
0 Hz
Range:
–80 MHz - 3.080 GHz
Hz
Key access: FREQ > Start Freq
N9340B Programmer's Guide