Table of Contents
Advertisement
N9340B Programmer's Guide
Amplitude Offset
:TGENerator:AMPLitude:OFFSet <ampt>
This command sets the amplitude offset of the tracking
generator output. This command is valid after tracking
generator is enabled.
*RST:
0 dB
Key access:
Meas > Amptd Offset
Storing as Reference
:TGENerator:NORMalize:REF
This command stores the current trace to Trace 4 as a
reference. This command is valid after tracking generator is
enabled.
Key access:
Meas > Normalize >Store Ref
Normalization
:TGENerator:NORMalize:STATe OFF|ON|0|1
:TGENerator:NORMalize:STATe?
This command toggles the normalization between on and off.
*RST:
Off
Key access:
Meas > Normalize > Normalize On/Off
Normalization Reference Level
:TGENerator:NORMalize:LEVel
:TGENerator:NORMalize:LEVel?
Use this command to set the normalization reference level.
*RST:
0 dB
Range:
–327.6 to 327.6 dB
Key access:
Meas > Normalize > Norm Ref Lvl
Command Reference
<para>
5
95
Advertisement
Table of Contents
