Table of Contents
Advertisement
5
Command Reference
80
Key access:
MEAS > Spectrum Emission Mask > Offset/Limits > More > More >
Fail Mask
Set the Sweep Time
:MEASure:SEMask:SWEeptime <number>
:MEASure:SEMask:SWEeptime?
:MEASure:SEMask:SWEeptime:AUTO OFF|ON|0|1
:MEASure:SEMask:SWEeptime:AUTO?
Specifies the sweep time used in measuring the power in the
main channel.
*RST:
Auto
Range:
8.37 ms through 4 ks
Example:
:MEAS:SEM:SWE 4 s
Key access:
MEAS > Spectrum Emission Mask > Ref Channel > Sweep Time
Set the Meas Type
:MEASure:SEMask:TYPE TPRef|PSDRef
:MEASure:SEMask:TYPE?
Displays a menu where you can select a measurement
reference type, Total Pwr Ref or PSD Ref.
*RST:
Total Pwr Ref
Example:
:MEAS:SEM:TYPE TPRef or SEM:TYPE PSDRef
Key access:
MEAS > Spectrum Emission Mask > Meas Type
N9340B Programmer's Guide
Advertisement
Table of Contents
