UPS5000-E-(50 kVA-300 kVA)
User Manual (50 kVA Power Modules)
Figure 3-28 Preparing a cable terminal outside the cabinet
Step 4 Connect the cable with a crimped terminal to the corresponding copper bar.
Step 5 Clean foreign matter inside the cabinet.
----End
3.2.5 Routing Cables (UPS5000-E-200K-SM)
3.2.5.1 Routing Cables from the Top
Context
Route cables for the UPS from inside out.
Procedure
Step 1 Ensure the maintenance bypass switch is OFF. Open the front door, and remove the cover
from the power distribution subrack, as shown in
bars is shown in
Issue 11 (2019-12-20)
Choose an appropriate cabling route based on the actual situation. The figure is for reference only.
Figure 3-30
Copyright © Huawei Technologies Co., Ltd.
Figure
3-29. The positioning of the copper
3 Installation
73