Setting The Connection Type - Huawei VP9660 Quick Start Manual

HUAWEI VP9660
Quick Start Guide
Component

4.1.2 Setting the Connection Type

Before you use the SMC2.0 to initiate a conference, set the connection type to SMC2.0.
Step 1 Log in to the VP9660 web interface.
Step 2 Choose Settings > System > Connection Management.
The Connection Management page is displayed, as shown in
Figure 4-2 Connection Management page
Step 3 Set the parameters listed in
Table 4-4 Connection parameters
Parameter
Connection
type
Network
interface
Issue 04 (2013-12-30)
IP Address
Table 4-4.
Description
Type of the conference
management system to which the
VP9660 is connected.
 Third party: The conference
management system is a
third-party system.
 SMC2.0: The conference
management system is the
SMC2.0 or IP multimedia
subsystem (IMS).
Network port used by the VP9660
to connect to the conference
management system. The
following options are available:

FE

GE0
 GE1
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
4 Using the SMC2.0
Other Configuration
 GK authentication name: terminal
2
Figure 4-2.
Settings
Select SMC2.0.
Default value: ANY
It is recommended that you select
GE0.
46