Short Message Service Commands; Csms-Select The Sms Type; Command Syntax; Description - Huawei MU509 At Command Interface Specification

HUAWEI MU509 HSDPA LGA Module
AT Command Interface Specification
6
6.1 +CSMS–Select the SMS Type

6.1.1 Command Syntax

Command
+CSMS=<service>
+CSMS?
+CSMS=?

6.1.2 Description

The SET command is used to set the message service type. The returned <mt>,
<mo> and <bm> mean whether this service type is supported for the messages
received by the terminal, messages sent by the terminal.

6.1.3 Defined Values

<service>: message service type.
0: 3G TS 23.040, 3G TS 23.041 (the syntax of SMS AT commands is compatible with
GSM 07.05 Phase 2 version 4.7.0) (default value)
1: 3G TS 23.040, 3G TS 23.041 (the syntax of SMS AT commands is compatible with
GSM 07.05 Phase 2+ version.)
<mt>, <mo>, <bm>: <mt> for mobile terminated messages, <mo> for mobile
originated messages and <bm> for broadcast type messages.
0: Reserved, not supported currently.
Issue 04 (2013-01-28)

Short Message Service Commands

Possible response(s)
<CR><LF>+CSMS: <mt>,<mo>,<bm><CR><LF>
<CR><LF>OK<CR><LF>
<CR><LF>+CSMS:
<service>,<mt>,<mo>,<bm><CR><LF>
<CR><LF>OK<CR><LF>
<CR><LF>+CSMS: (list of supported
<service>s)<CR><LF>
<CR><LF>OK<CR><LF>
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Short Message Service Commands
64