Mitsubishi Electric MELSEC iQ-R Series User Manual page 89

*1 The information displayed on the upper left of "Selected Station Communication Status Monitor" indicates the communication status of
the safety remote I/O module and does not indicate the error status of the selected module. For the error status of the module, refer to
the following.
Page 83 Checking Module Status
Remote operation
1.
Select a slave station to be reset and click the [Remote Operation] button.
2.
Clicking the [Yes] button starts the remote reset.
3.
Click the [OK] button.
10 TROUBLESHOOTING
10.3 Checking Network Status
10
87