Checking Module Status; Checking With The Engineering Tool - Mitsubishi Electric MELSEC iQ-R Series User Manual

10.2

Checking Module Status

Checking with the engineering tool

When the data link is established between the safety remote I/O module and the master station, errors can be checked on the
engineering tool.
• Page 83 Checking with "Command Execution of Slave Station"
• Page 85 Checking error codes and warning codes
When the user authentication function of the Safety CPU is enabled, perform the logon of the user
authentication function in advance. For the user authentication function, refer to the following.
Page 60 User Authentication Function
Checking with "Command Execution of Slave Station"
The following describes how to check errors with "Command Execution of Slave Station" in the "Network Configuration
Settings".
1.
Select the safety remote I/O module in "List of stations" on the "CC IE Field Configuration" window.
2.
Open the "Command Execution of Slave Station" window.
[CC IE Field Configuration]  [Online]  [Command Execution of Slave Station]
3.
Set "Method selection" to "Error history read" and click the [Execute] button.
4.
Clicking the "Execute" button displays a confirmation window. Check the contents and click the [Yes] button to read the
error history data.
5.
When the following window is displayed, click the [OK] button.
10 TROUBLESHOOTING
10.2 Checking Module Status
10
83