Requirements to compliance with the Low Voltage Directive
The module operates at the rated voltage of 24VDC.
The Low Voltage Directive does not apply to the modules that operate at the rated voltage of less than 50VAC and 75VDC.
Measures to comply with the Machinery Directive
The Machinery Directive (2006/42/EC) requires that machinery satisfy the three pillars of safety: mechanical safety, electrical
safety, and worker safety.
This product complies with the Machinery Directive (2006/42/EC). Before using this product, please read this manual, the
relevant manuals, the manuals for standard programmable controller, and the safety standards carefully and pay full attention
to safety to handle the product correctly.
The descriptions are based on the requirements of the Machinery Directive and the harmonized standards. However, they do
not guarantee that the entire machinery constructed according to the descriptions complies with the Machinery Directive. The
manufacturer of the machinery must determine the testing method for compliance and declare conformity to the Machinery
Directive.
A
APPX
129
Appendix 5 EMC, Low Voltage, and Machinery Directives