3.
Drag and drop the icon of the safety remote I/O module from "Module List" to the lower window. At this time, "STA#",
"Station Type", "RX/RY Setting", and "RWw/RWr Setting" are automatically input. Change a value as necessary.
4.
Close the "CC IE Field Configuration" window.
[Close with Reflecting the Setting]
5.
After applying the module parameter setting of the master station, write the setting to the programmable controller. For
the module parameter setting of the master station, refer to the following.
MELSEC iQ-R CC-Link IE Field Network User's Manual (Application)
MELSEC iQ-R Simple Motion Module User's Manual (Application)
8 PARAMETER SETTINGS
66
8.1 Module Parameter Setting of the Master Station