Chapter 2 Part Names - Mitsubishi Electric MELSEC iQ-R Series User Manual

2
PART NAMES
Part names of the safety remote I/O module
This section describes the part names of the safety remote I/O module.
(1)
(2)
(3)
(4)
(5)
(6)
(1)
No. Name
(1) FG metal fitting
(2) Power supply connectors
(3) I/O connector
(4) Signal label
(5) Station number setting switch
(6) Communication
connectors
2 PART NAMES
16
Application
Metal fitting for connecting FG
For the tightening torque of screws for the FG metal fitting, refer to the following.
Page 39 Fixing the safety remote I/O module
Connectors for the module power supply (24VDC) and load power supply (24VDC)
Connector for I/O signals
Label for describing signal names
Rotary switch for setting a station number or tests
Page 35 Setting the Station Number
Page 88 Unit Test
P1 PORT1 connector for CC-Link IE Field Network
Connect an Ethernet cable.
Page 41 Wiring of Ethernet cable
P2 PORT2 connector for CC-Link IE Field Network
Connect an Ethernet cable.
Page 41 Wiring of Ethernet cable