Set "Method selection" to "Parameter write" so that a value can be set in an item of "Write Value". Set values in all the
items of "Write Value". If an item where a value is not set exists, the parameters cannot be written. For the module
parameter list for the safety remote I/O module, refer to the following.
Page 72 Module parameter list
Click the [Execute] button and a confirmation window is displayed. Check the contents and click the [Yes] button to write
After the parameters are written, a confirmation dialog box is displayed.
• When writing parameters has failed, the following window is displayed.
For error codes, refer to the following and take corrective actions.
Page 95 Error Code List
MELSEC iQ-R CC-Link IE Field Network User's Manual (Application)
• When "Parameter write" is executed with the Safety CPU set in SAFETY MODE, an error window is
displayed and the parameter writing is stopped. For details on SAFETY MODE, refer to the following.
MELSEC iQ-R CPU Module User's Manual (Application)
After writing parameters is completed, visually check that the module parameters have been normally written to the
module. To check the module parameters, refer to the following.
GX Works3 Operating Manual
Perform the operations from "Parameter write" to the visual check of the module parameters for all safety remote I/O
8 PARAMETER SETTINGS
8.2 Module Parameter Setting