Enable / Disable Zones - Honeywell NOTIFIER INSPIRE E10 Operating Instructions Manual

Enable / Disable Zones

ENABLE / DISABLE ZONES
You can selectively disable or enable Zone(s) using the
'Group by: Zones' view. Also you can enable or disable
System Functions from this view.

Enable/Disable
Enable / disable Devices, Zones
etc



1 Point
15 Points Points
20 Points
5 Points
16 Points
17 Points Points
27 Points Points
7 Points

20


Control Outputs
If disabled, the
Display shows:
LED indication
given:
DISABLE
How to Enable / Disable Zone(s)
01
Select the Menu icon
Access level 2 password.
02
Select the 'Enable/Disable'
ensure 'Group By: Zone'
drop down options.
03
Momentarily select the required Zone check
box(s)
checked
04
Select either 'Permanently Disable' or
'Enable'
are either disabled or enabled.
How to Enable/Disable
05
Carry out steps as for How to Enable /
Disable Zone(s), steps 01 to 02. Expand the
'System Functions' view
06
If installed and configured you can now
select either 'Disable' or 'Enable'

required 'System Function':
- Alarm Devices
- Fire Alarm Routing Equipment
- Fire Protection Equipment
- Fault Routing Equipment
- Control Outputs.
An indication is given if disabled.

and log in with your


is selected from

ensure the required boxes are
..

button. Note the selected Zone(s)
System Functions

.
button and

the