Operation - Enable / Disable Zone And Point - Honeywell LT-32 Installation And User Manual

Fire Alarm Control Panel LT-32 / LT-159

14 OPERATION - ENABLE / DISABLE ZONE AND POINT

1. Follow the steps to enter in "Configuration" menu, select "Enable/Disable" icon to have access to Zone and Point options, then select Zone to view the list and
then click on the icon near the Zone you would like to Disable to change its status. The Disabled icon
updated, in this example Z02. Press the back arrow
2. Same procedures applies to Disable a Point:
3. To Enable a Zone or Point again follow the same steps: clicking on the related Disabled icon
icon . Press the back arrow
46
to go back to the main screen.
to go back to the main screen.
appears near the selected Zone and label will be
the Zone or Point get activated again, showing the Enabled
M-168.1-SERIE-LT-EN / 08.2022