Camera Rear View - Ikegami HDK-790GX Operation Manual

2.1 Camera and Viewfi nder

Camera Rear View

REAR SCRIPT connector ⑪
INCOM1 MIC SELECT switch ⑫
INCOM1 MIC switch ⑬
INCOM1 connector ⑭
INCOM1 volume control knob ⑮
① EXTENDER switch
Turns ON/OFF the lens extender.
② FOCUS ASSIST switch
Turns ON/OFF the FOCUS ASSIST. The switch lights up when it is ON.
The intensity of light can be changed with the REAR TALLY switch on the rear control panel.
Caution:
If the REAR TALLY switch is set to OFF, the light does not turn on even when the FOCUS ASSIST function is turned ON.
③ FUNC switch
Turns ON/OFF the functions assigned in the menu. The switch lights up when it is ON.
The intensity of light can be changed with the REAR TALLY switch on the rear control panel.
Caution:
If the REAR TALLY switch is set to OFF, the light does not turn on even when the FUNC function is turned ON.
④ RET SELECT switch
Selects the RET signal to be output on the view nder.
RET-1 : Outputs the Return video-1 signal.
RET-2 : Outputs the Return video-2 signal.
RET-3 : Outputs the Return video-3 signal.
RET-1 selector switch : A switch used to select one of the return video signals as the RET-1 signal from the four lines that are
connected to CCU.
RET-2 selector switch : A switch used to select one of the return video signals as the RET-2 signal from the four lines that are
connected to CCU.
RET-3 selector switch : A switch used to select one of the return video signals as the RET-3 signal from the four lines that are
connected to CCU.
When all return signals are selected simultaneously, the signals are output in the following sequence: RET-1 > RET-2 > RET-3.
⑤ CALL button
A button used to call VE (Video Engineer). When this button is pressed, the RED TALLY indicator on the CCU and control panel
lights up and buzzer sounds.
14
CAMERA
FOCUS
ＯＮ
EXT ASSIST FUNC
Ｓ Ｔ ＢＹ
RET-1 RET-2 RET-3
2 3 2 3 2 3
1 4 1 4 1 4
CALL
INCOM-1 INCOM-2
INCOM MIC SEL INCOM MIC SEL
MIC MIC
ON PROD ON PROD
BOTH BOTH
OFF OFF
PTT ENG PTT ENG
PGM-1 PGM-2 PGM-1 PGM-2
HDK-790GX 1403 VER1 (U)
① EXTENDER switch
② FOCUS ASSIST switch
③ FUNC switch
④ RET SELECT switch
⑤ CALL button
⑥ REAR TALLY lamp
⑦ INCOM2 MIC switch
⑧ INCOM2 MIC SELECT switch
⑨ INCOM2 connector
⑩ INCOM2 volume control knob