Table of Contents
Advertisement
6.5 Reset the Breaker
6.5 Reset the Breaker
If power is not being supplied to the camera even though the power is on and peripherals are connected correctly, it might mean
that the power has been cut off by the breaker. In this case, reset the breaker as follows:
1
Check that the camera's POWER switch is OFF.
2
Push down the breaker on the right side of the camera.
96
RET SW
I/O
REMOTE
HD TRUNK
MONI-SDI
QTV-2
IN
OUT
Q-TV/GL
MON
HDK-790GX 1403 VER1 (U)
SCRIPT
Advertisement
Table of Contents
