Switch Position Check - Ikegami HDK-790GX Operation Manual

4.2

Switch Position Check

4.2 Switch Position Check
When the camera is used for the rst time, set the switches on the camera to the positions indicated in the gures below, and ensure
that the camera works properly. Once set, these switches do not have to be set again unless required. This section explains a camera
- - -
system connected to the CCU.
Camera inside the right side plate
- HEAD POWER switch : ON
- - -
Camera control panel
- FRONT TALLY switch : ON
- VF MARKER switch : ON
- CHARACTER switch : ON
- CURSOR switch : OFF
- LAMP switch : ON
Note:
The FILTER local indicator lights up when the CCU is
connected, and the camera has an operation right for the CC
FILTER switch and ND FILTER switch.
Pressing the FILTER HEAD switch will switch the operational
priority between the camera and CCU.
Caution:
If the REAR TALLY switch is set to OFF, the light does not turn
on even when the FOCUS-ASSIST function / FUNC function is
turned ON.
- - -
Rear view Camera INCOM panel
- INCOM-1 MIC switch : ON
- INCOM-2 MIC switch : ON
- - -
Camera Right View MIC AMP (option)
- MIC-1 POWER switch
- MIC-2 POWER switch
Depending on the type of microphone to use, the power supply
settings differ.
Switch Position
AB+12V Supplies +12V AB power to the microphone.
OFF Supplies no power to the microphone. Applicable for a dynamic
microphone or a microphone with built-in power supply which
requires no power supply.
P.+48V Supplies +48V Phantom power
Reference:
For details on the microphone, refer to the instructions accompanying the microphone to be used.
50
Description
HDK-790GX 1403 VER1 (U)
HEAD POWER switch
FRONT TALLY switch
REAR TALLY switch
LAMP switch
VF MARKER switch
CHARACTER switch
CAMERA
ON
STBY MENU SELECT
(PUSH SET)
FRONT REAR VF
VF
ON
TALLY TALLY LAMP MARKER
CHARACTER
ON ON ON ON MENU
DIM DIM ON
OFF OFF OFF OFF
CURSOR
VF IND
POSITION SIZE
CROSS
OFF
BOX
VF DTL
CROSS
OFF
BOX
FILTER
ND ECC EFFECT
HEAD 1 2 3 4 5 A B C D E
AUTO
SLOW
CAMERA control panel
INCOM-1
INCOM MIC SEL
MIC MIC
ON PROD ON
OFF BOTH OFF
ENG
PTT PTT
PGM-1 PGM-2
INCOM-1 MIC switch
MIC-1 POWER
switch
CURSOR
switch
FAN
INCOM-2
INCOM MIC SEL
PROD
BOTH
ENG
PGM-1 PGM-2
INCOM-2 MIC switch
MIC-2 POWER
switch