Ikegami HDK-790GX Operation Manual page 90

5.2 Settings from the Menu
M1
Turn the MENU SELECT switch to position the
cursor on the AUTO SEL NAME display part
(AB40X10 ABCD), and press the MENU SELECT
switch.
The screen switches to a display for obtaining a new
model number from the lens, and the letters "CANCEL"
ash.
Note:
"(AB40X10 ABCD)" is used here for an example of
the model name automatically and previously obtained
from the lens.
M2
Turn the MENU SELECT switch to switch the
cursor on "CANCEL" to "AUTO READ", and press
the MENU SELECT switch.
- "COMPLETED" appears on the bottom.
- When "COMPLETED" disappears, a newly loaded
model name will appear.
Note:
"(BB40X10 BCDE)" is used here for an example of the
model name automatically and newly obtained from
the lens.
M3
Turn the MENU SELECT switch to position the
cursor on "FILE SET", and press the MENU
SELECT switch.
The cursor moves to the mode selection column.
M4
Turn the MENU SELECT switch to move the
cursor from "MANUAL" to "OFF", and then press
the MENU SELECT switch to complete the lens
fi le creation. Then, go to the step 8.
78
ＬＥＮＳ ＳＥＬＥＣＴ
ＮＵＭＢＥＲ ＮＯ．１
ＮＡＭＥ （ ）
（ＡＢ４０Ｘ１０ ＡＢＣＤ ）
ＥＸＴＥＮＤＥＲ ＯＦＦ
ＡＵＴＯ ＳＥＬ ＯＦＦ
ＦＩＬＥ ＳＥＴ ＭＡＮＵＡＬ
ＬＥＮＳ ＴＹＰＥ ＊＊＊
ＬＥＮＳ ＮＯ．１
ＮＵＭＢＥＲ ＮＯ．１
ＮＡＭＥ （ ）
ＭＯＤＥＬ ＣＡＮＣＥＬ
ＥＸＴＥＮＤＥＲ ＯＦＦ
ＡＵＴＯ ＳＥＬ ＯＦＦ
ＦＩＬＥ ＳＥＴ ＭＡＮＵＡＬ
ＮＵＭＢＥＲ ＮＯ．１
ＮＡＭＥ （ ）
ＭＯＤＥＬ ＡＵＴＯ ＲＥＡＤ
ＥＸＴＥＮＤＥＲ ＯＦＦ
ＡＵＴＯ ＳＥＬ ＯＦＦ
ＦＩＬＥ ＳＥＴ ＭＡＮＵＡＬ
ＮＵＭＢＥＲ ＮＯ．１
ＮＡＭＥ （ ）
ＭＯＤＥＬ ＡＵＴＯ ＲＥＡＤ
ＥＸＴＥＮＤＥＲ ＯＦＦ
ＡＵＴＯ ＳＥＬ ＯＦＦ
ＦＩＬＥ ＳＥＴ ＭＡＮＵＡＬ
ＬＥＮＳ ＴＹＰＥ ＊＊＊
ＬＥＮＳ ＮＯ．１
ＣＯＭＰＬＥＴＥＤ
ＮＵＭＢＥＲ ＮＯ．１
ＮＡＭＥ （ ）
（ＢＢ４０Ｘ１０ ＢＣＤＥ ）
ＥＸＴＥＮＤＥＲ ＯＦＦ
ＡＵＴＯ ＳＥＬ ＯＦＦ
ＦＩＬＥ ＳＥＴ ＭＡＮＵＡＬ
ＬＥＮＳ ＴＹＰＥ ＊＊＊
ＬＥＮＳ ＮＯ．１
ＮＵＭＢＥＲ ＮＯ．１
ＮＡＭＥ （ ）
（ＢＢ４０Ｘ１０ ＢＣＤＥ ）
ＥＸＴＥＮＤＥＲ ＯＦＦ
ＡＵＴＯ ＳＥＬ ＯＦＦ
ＦＩＬＥ ＳＥＴ ＭＡＮＵＡＬ
ＬＥＮＳ ＴＹＰＥ ＊＊＊
ＬＥＮＳ ＮＯ．１
ＮＵＭＢＥＲ ＮＯ．１
ＮＡＭＥ （ ）
（ＢＢ４０Ｘ１０ ＢＣＤＥ ）
ＥＸＴＥＮＤＥＲ ＯＦＦ
ＡＵＴＯ ＳＥＬ ＯＦＦ
ＦＩＬＥ ＳＥＴ ＯＦＦ
ＬＥＮＳ ＴＹＰＥ ＊＊＊
ＬＥＮＳ ＮＯ．１
HDK-790GX 1403 VER1 (U)
M①
Position the cursor on
"AB40X10 ABCD" and
confirm.
The letters "CANCEL"
flash.
M②
Switch the cursor to
"AUTO READ" and
confirm.
"COMPLETED"
appears.
The model name
newly loaded from the
lens appears.
M③
Position the cursor on
"FILE SET" and
confirm.
M④
Switch the cursor on
"MANUAL" to "OFF"
and confirm.