Ikegami HDK-790GX Operation Manual page 104

6.3 Initializing the Settings of this Product
5
Turn the MENU SELECT switch to select the set
value, and press the MENU SELECT switch.
The value is con rmed.
- Selecting "CANCEL" cancels the setting and
terminates "PRESET FILE LOAD".
- Selecting "START" displays "PUSH SET -> START"
at the bottom of the screen.
Go to Step 6 when selecting "START".
6
Press the MENU SELECT switch.
Initialization starts.
When the le load is completed, "COMPLETED"
appears on the screen. Then, "CAMERA RESTART"
blinks for about three seconds. After that, the camera
restarts and the initialization is completed with the le
selected in "FILE SELECT".
92
ＰＲＥＳＥＴ ＦＩＬＥ ＬＯＡＤ
ＦＩＬＥ ＳＥＬＥＣＴ ＥＮＧＩＮＥＥＲ
ＬＯＡＤ ＳＴＡＲＴ ＳＴＡＲＴ
ＰＵＳＨ ＳＥＴ→ＳＴＡＲＴ
ＰＲＥＳＥＴ ＦＩＬＥ ＬＯＡＤ
ＦＩＬＥ ＳＥＬＥＣＴ ＥＮＧＩＮＥＥＲ
ＬＯＡＤ ＳＴＡＲＴ ＳＴＡＲＴ
ＣＯＭＰＬＥＴＥＤ
ＰＲＥＳＥＴ ＦＩＬＥ ＬＯＡＤ
ＦＩＬＥ ＳＥＬＥＣＴ ＥＮＧＩＮＥＥＲ
ＬＯＡＤ ＳＴＡＲＴ ＳＴＡＲＴ
ＣＡＭＥＲＡ ＲＥＳＴＡＲＴ
HDK-790GX 1403 VER1 (U)
⑤
Select the set value
and confirm.
- Selecting "START"
displays a message
at the bottom of the
screen.
⑥
"COMPLETED" is
displayed at the
bottom of the screen.
⑥
"CAMERA RESTART"
is displayed at the
bottom of the screen.