Ikegami HDK-790GX Operation Manual page 42

2.2 Displays in the Viewfi nder
① Memory backup battery voltage
The warning message is displayed for 5 seconds when the
voltage of the backup battery in the MPU module has dropped.
② Auto setup function
Executing auto setup function is displayed.
"AWB"
"ABB"
"FULL SETUP"
"LEVEL SETUP" etc.
③ Execution result of auto setup
Execution result of auto setup (AWB and ABB, including) is
displayed.
OK : Auto setup has been completed.
NG : Auto setup was not completed.
STOP : Auto setup was discontinued.
LEVEL OVER : Input signal level is too high.
LEVEL UNDER : Input signal level is too low.
CHG FILTER : Optical lter is not appropriate.
④ Adjustment item of auto setup
The item to which adjustment is being made is displayed
during auto setup.
"FLARE GAMMA GAIN"
"PED"
"IRIS" etc.
⑤ Fan status
The fan status is displayed.
AUTO : Fan is in the AUTO mode.
Displayed when the VF CHAR button is pressed.
SLOW : Fan is in the SLOW mode.
Displayed when the VF CHAR button is pressed.
QUIET : Fan is in the QUIET mode.
Displayed when the VF CHAR button is pressed.
STOP : Fan is in the STOP mode.
Displayed when the VF CHAR button is pressed.
FAN!! : Displayed ashing when the fan has stopped
abnormally.
⑥ AWB color temperature
The color temperature stored in A-ch or B-ch memory
is displayed for 2 seconds when the AWB/ABB switch is
operated. (Selection between A-ch and B-ch is made by the
AWB SELECT switch.) The AWB color temperature is also
displayed when the FILTER switch is operated.
⑦ SKIN DTL ON/OFF
"SK" is displayed when the SKIN DTL function is ON.
⑧ OPT level
Optical signal level of the ber cable is displayed when the
CCU is connected to the camera. When the optical signal level
is normal, "OPT OK" is displayed for 2 seconds.
⑨ BARS TITLE
The bar title is displayed when the color bar is output.
⑩ Temperature warning
This warning is displayed when the temperature of the inside
of the camera is high.
26
⑪ ND and CC filter numbers
1
ND
100%
A
ECC
3200K
Ⅰ
EFF
CLEAR
⑫ Operational priority for filter control
"*" is displayed when the camera has the operational priority
for the lter control.
⑬ AWB memory channel
The memory selected by the AWB SELECT switch is
displayed.
A : A-ch memory
B : B-ch memory
O : White balance adjustment is in the preset condition
(3200K).
⑭ Shutter speed/focus indicator/zoom indicator
The shutter speed or focus, zoom position is displayed.
⑮ Digital Extender
Magni cation is displayed when the digital extender is ON.
⑯ Return video input channel
Input channel for return video is displayed.
RET-1 : Return video 1 is selected.
RET-2 : Return video 2 is selected.
RET-3 : Return video 3 is selected.
RET-4 : Return video 4 is selected.
HDK-790GX 1403 VER1 (U)
2 3 4
25% 6.2% 1.6%
B C D
4300K 5600K 6300K
Ⅱ Ⅲ Ⅳ
CROSS SNOW FOG
5
CAP
E
8000K
Ⅴ
−