Table of Contents
Advertisement
Menu Item
CUSTOM GAMMA DATA
| |
― EASY MODE
|
| |
| |
| |
| |
― DEFAULT RESET
|
| | | |
― SELECT
| |
― CURVE TYPE
| | | |
― INITIAL GAIN
| | | |
― 18% GRAY
| | | |
― DYNAMIC RANGE
| |
― WHITE LIMIT
| |
| |
|
|
― CAL
| |
|
|
| |
― SAVE
|
― SHUTTER
| |
|
― SHUTTER SPEED
| |
|
― GAMMA CURVE COPY
― SD MEMORY CARD
|
|
― SAVE
― LOAD
|
PRESET FILE LOAD
|
― FILE SELECT
|
― LOAD START
*3 : No. 2 of S11 on the MPU module must to be "ON" when creating the reference le.
Make sure to turn off the camera when selecting the switch.
Make sure turn off No. 2 of S11 after creating the reference le.
It is not necessary to turn on this switch when creating the reference le from the control panel.
*4 : If the manual set value is set with the control panel, the variable value can change with the manual set value.
Ex.) The value varies between -50 and +50 in the menu when the manual set of the GAIN is set at 50.
*5 : CUSTOM GAMMA MODE - Loads the custom gamma data from SD card through the LOAD menu.
- - -
MENU (4/4)
Menu Item
DIGITAL EXTENDER MODE
|
― DIGITAL EXTENDER
|
― MAGNIFICATION
| |
― HEAD SW CONTROL
|
|
― PUSH SET SW
MENU MODE
|
|
― ENGINEER MENU
Initial
Setting value
setting
READY, EXECUTE,
---
CANCEL
NORMAL, CINE1 to 2,
NORMAL
CUSTOM1 to 5
---
NORMAL, LOG, SPECIAL Sets the basic properties of gamma curve.
---
1.0 to 9.0
---
14.0% to 107.0%
---
100% to 600%
---
70% to 109%
OFF, CAL100%,
OFF
CAL200%, CAL300%,
CAL400%, CAL600%
READY, EXECUTE,
---
CANCEL
OFF
OFF, PRESET, VARIABLE Selects for the electronic shutter.
PRESET:1/100 to 1/2000
1/100
VARIABLE:
1/63.4 to 1/1983
CUSTOM1 to 5
---
CUSTOM1 to 5
---
---
---
---
ENGINEER ENGINEER, FACTORY
READY
READY, START, CANCEL Executes initialization.
Initial
Setting value
setting
OFF
OFF, ON
x1.5
x1.5, x2, x3, x4
ENABLE
ENABLE, DISABLE
ON/OFF
ON/OFF, MAG
OFF
OFF, ON
HDK-790GX 1403 VER1 (U)
Description, Remarks
Easy creation mode. Sets various parameters and creates the
custom gamma data.
Returns to the original custom gamma data.
If you have saved the custom gamma data with the "SAVE"
function, it returns to the saved data.
The original data cannot be recovered once it is overwritten
with the "SAVE" function.
Selects the gamma table to be created.
Sets the slope of gamma curve at around 0%.
The curve rises steeply as the value increases.
Sets what level it should be after the gamma has been
applied when converting from 18% level before applied.
Sets the maximum level (the maximum input level to the
gamma) before the gamma has been applied.
Sets the white clip after the gamma has been applied.
Selects the test waveform (CAL) to check the gamma table.
Saves the data that has been created.
The data is temporary unless you save it.
Therefore, the data will be cleared if you end the menu
without saving it.
Switches the shutter speed.
(When SHUTTER is in PRESET and VARIABLE only.)
Copies the gamma data that has been created into the other
data in the camera.
Saves the custom gamma data in an SD card.
Loads the custom gamma data from an SD card.
Function to load the user settings (ENGINEER SET FILE)
or factory settings (FACTORY SET FILE) for the level
adjustment or menu of the camera.
Used to return the camera state back to the previous or
initial settings.
ENGINEER : Initializes the state back to the user setting.
FACTORY
: Initializes the state back to the initial factory
setting.
Description, Remarks
Selects ON/OFF for the digital extender.
Selects the magnification of the digital extender.
Sets whether to allow or restrict the digital extender control
from the rotary encoder switch on the camera.
Sets whether to have ON/OFF option only or to include
a control option for the magnification when the digital
extender is controlled from the switch on the camera.
If set to ON, possible to display engineer menu.
If the camera power is turned OFF, this menu setting returns
to OFF.
5.2 Settings from the Menu
MENU DATA
ALL
VF
-
-
-
-
* 5
-
-
-
* 5
-
* 5
-
-
-
* 5
-
* 5
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
MENU DATA
ALL
VF
-
-
-
-
-
-
75
5
Advertisement
Table of Contents
