Ikegami HDK-790GX Operation Manual page 95

- - -
Storing the camera setting state on the memory card
Store the camera setting state on the memory card. First con rm that the write protect switch of the memory card is not on the
LOCK side.
1
Turn the MENU SELECT switch on MENU (2/4), set the cursor to
[MEMORY CARD] and press the SET button.
The submenu is displayed.
2
Select [SAVE FILE] and press the SET button.
The SAVE FILE submenu is displayed.
3
Select the item from the SAVE FILE submenu that you wish to save.
Select ALL DATA on the picture.
4
After selecting the item you wish to save, press the SET button. Then
use the MENU SELECT switch and SET button to insert an eight-
character fi le name.
When the eight character fi le name has been determined, [PUSH SET
-> START] is displayed on the cursor.
Press the SET button.If a fi le of the same fi le name exists on the
memory card at this time, proceed to step M1. If you wish to cancel, turn
the MENU SELECT switch when [PUSH SET -> START] is displayed.
5
When the fi le is being saved, [SAVING FILE] is displayed.
If the fi le is saved normally, [COMPLETE] is displayed.
Caution:
Never remove the memory card from the slot during display of [SAVING
FILE] or while the access indicator is lighted, as data is being written to the
memory card. Removing it at this time could damage the memory card data
or the memory card itself.
M1
If a fi le with the same fi le name exists on the memory card, a
message is displayed asking whether it is all right to write over the
data. To enable writing over of data, change [NO] to [YES] and press
the SET button. If [NO] has been selected, storage is cancelled and
the system returns to step [3].
Note:
The images of the storage range for les are shown in the gure below.
SNAPSHOT FILE
Parameters for adjusting
functions and ON/OFF state.
REFERENCE FILE
ALL FILE
SCENE FILE
(ABB/AWB)
LENS FILE
MENU FILE
HDK-790GX 1403 VER1 (U)
5.3 Using the Memory Card
ＭＥＭＯＲＹ ＣＡＲＤ
ＳＡＶＥ ＦＩＬＥ
ＬＯＡＤ ＦＩＬＥ
ＳＡＶＥ ＦＩＬＥ
ＡＬＬ ＤＡＴＡ
ＳＮＡＰ ＳＨＯＴ
ＳＣＥＮＥ
ＲＥＦＥＲＥＮＣＥ
ＬＥＮＳ
ＭＥＮＵ ＤＡＴＡ
ＳＡＶＥ ＦＩＬＥ
ＡＬＬ ＤＡＴＡ ＡＢＣＤＥＦＧＨ .ＣＤＦ
ＳＮＡＰ ＳＨＯＴ
ＳＣＥＮＥ
ＲＥＦＥＲＥＮＣＥ
ＬＥＮＳ
ＭＥＮＵ ＤＡＴＡ
ＰＵＳＨ ＳＥＴ→ＳＴＡＲＴ
ＳＡＶＥ ＦＩＬＥ
ＡＬＬ ＤＡＴＡ ＡＢＣＤＥＦＧＨ .ＣＤＦ
ＳＮＡＰ ＳＨＯＴ
ＳＣＥＮＥ
ＲＥＦＥＲＥＮＣＥ
ＬＥＮＳ
ＭＥＮＵ ＤＡＴＡ
ＯＶＥＲＬＡＰＰＥＤ ＦＩＬＥ ＮＡＭＥ .
ＯＶＥＲＷＲＩＴＥ ＮＯ
5
83