Table of Contents
Advertisement
⑥ REAR TALLY lamp
Supports RED/GREEN TALLY. RED/GREEN TALLY lights up independently.
RED TALLY lights up when the RED TALLY signal is input to the CCU, and then the CALL button is pressed from the CCU or
control panel.
GREEN TALLY lights up when the GREEN TALLY signal is input to the CCU.
RED TALLY lights up when the RED and GREEN TALLY signals are input simultaneously. RED TALLY lights up when the
CALL button is pressed while GREEN TALLY is lit.
⑦ INCOM2 MIC switch
ON/OFF switch of the intercom microphone for INCOM2.
ON : Turns ON the intercom microphone.
OFF : Turns OFF the intercom microphone.
PTT : Turns ON the intercom microphone while this switch is pressed.
⑧ INCOM2 MIC SELECT switch
Select switch of the intercom microphone for INCOM2.
PROD : Selects the line of microphone for the intercom system for Producer.
BOTH : Selects the line of microphone for the intercom system for both Producer and Engineer.
ENG
: Selects the line of microphone for the intercom system for Engineer.
⑨ INCOM2 connector
A connector used to connect the headsets for INCOM2.
⑩ INCOM2 volume control knob
A knob used to adjust the volume of intercom receiver for INCOM2.
INCOM : A knob used to adjust the volume of intercom receiver for INCOM-2.
PGM1
: A knob used to adjust the volume of PGM1 for the intercom system for INCOM-2.
PGM2
: A knob used to adjust the volume of PGM2 for the intercom system for INCOM-2.
⑪ REAR SCRIPT connector
Connects the SCRIPT lamp.
⑫ INCOM1 MIC SELECT switch
Select switch of the intercom microphone for INCOM1.
PROD : Selects the line of microphone for the intercom system for Producer.
BOTH : Selects the line of microphone for the intercom system for both Producer and Engineer.
ENG
: Selects the line of microphone for the intercom system for Engineer.
⑬ INCOM1 MIC switch
ON/OFF switch of the intercom microphone for INCOM1.
ON : Turns ON the intercom microphone.
OFF : Turns OFF the intercom microphone.
PTT : Turns ON the intercom microphone while this switch is pressed.
⑭ INCOM1 connector
A connector used to connect the headsets for INCOM1.
⑮ INCOM1 volume control knob
A knob used to adjust the volume of intercom receiver for INCOM2.
INCOM : A knob used to adjust the volume of intercom receiver for INCOM-1.
PGM1
: A knob used to adjust the volume of PGM1 for the intercom system for INCOM-1.
PGM2
: A knob used to adjust the volume of PGM2 for the intercom system for INCOM-1.
HDK-790GX 1403 VER1 (U)
2.1 Camera and Viewfi nder
15
2
Advertisement
Table of Contents
