Table of Contents
Advertisement
6.6 Replacing the fuse
If this product cannot be turned on when the power supply and peripherals are connected properly, the fuse may be blown. In that
case, replace the fuse.
Caution:
Use the speci ed fuse or equivalent.
1
Make sure the MAIN POWER switch on the CCU is set to "OFF".
2
Push the fuse on the left side of the camera using a fl at-blade screwdriver, and then turn it counterclockwise to
remove.
3
Insert a new fuse and turn it clockwise using a fl at-blade screwdriver until it seats fi rmly.
TRUNK OUT
HDK-790GX 1403 VER1 (U)
6.6 Replace the fuse
Press the fuse, and remove by turning
it counter-clockwise.
UTILITY
AC IN
100/117V
100/117V
T2A
T4A
100/117V:4A
220/240V:2A
100/117V:2A
220/240V:1A
6
97
Advertisement
Table of Contents
