Adjusting The Height Of The Viewfi Nder; Adjusting The Direction Of The Viewfi Nder - Ikegami HDK-790GX Operation Manual

4.4 Viewfi nder Adjustment
Adjusting the Height of the Viewfi nder
This section explains how to adjust the height of the VF.
1
Pull the height lock knob and unlock the VF.
2
Adjust the height of the VF moving the handle up and down.
Set the height of the VF to an easy-to-operate position.
3
Press the height lock knob and lock the VF.
Height lock knob
Adjusting the direction of the Viewfi nder
This section explains how to adjust the direction of the VF.
Note:
No panning is possible if the front-rear position of the camera is set at the front. Panning is possible only when the camera is placed at
the rear position.
1
Rotate the pan lock knob to the RELEASE side and loosen the break.
2
Adjust the direction of the VF with the handle.
3
Rotate the pan lock knob to the LOCK side and apply the break.
Rear
Front
RELEASE RELEASE RELEASE
Pan lock knob
54
Handle
handle
HDK-790GX 1403 VER1 (U)
LOCK LOCK LOCK