Table of Contents
Advertisement
5.2 Settings from the Menu
Menu Item
| |
― EXTENDER
| |
― AUTO SEL
| |
― FILE SET
| |
| |
| |
― LENS TYPE
| |
| |
|
| |
| |
― AUTO x0.8 CONV
|
|
― LENS SERIAL I/F
LEVEL ADJUST
| |
― MASTER GAMMA
|
| |
― MASTER PED
|
| |
― MASTER FLARE
|
| |
― DTL GAIN
|
|
― ADJ CLR
PROCESS MODE
| |
| |
― GAMMA TYPE
|
| |
| |
― SMOOTH STEP GAIN
| |
| |
― SMOOTH STEP ECC
| |
― MATRIX
|
― HI-LIGHT DTL
| | | |
― GAIN
| |
|
|
― LIMIT
|
| |
| |
― SMOOTH KNEE
| |
| |
|
― DTL V FILTER
|
― LINE MIX
74
Initial
Setting value
setting
OFF
OFF, ON-1, ON-2
OFF
OFF, ON
OFF
OFF, MANUAL, AUTO
OFF, C.PORTABLE,
C.STUDIO, C.FIELD,
OFF
F.PORTABLE, F.STUDIO,
F.FIELD
OFF
OFF, ON
ON
ON, OFF
0.0
-100 to +100
0.0
-100 to +100
0.0
-100 to +100
0.0
-100 to +100
READY,
READY
PUSH SET CLR,
CANCEL
NORMAL,
NORMAL
CUSTOM1 to 5
OFF,
ON-0.3s, ON-0.5s, ON-
ON-0.5s
0.7s, ON-1.0s, ON-1.5s,
ON-2.0s
OFF,
ON-0.3s, ON-0.5s, ON-
ON-0.5s
0.7s, ON-1.0s, ON-1.5s,
ON-2.0s
OFF
OFF, 1, 2, 3
ON
OFF, ON
* 4
0.0
0 to 100
0.0
-100 to +100 *
4
OFF,
TYPE-1
TYPE1, TYPE2, TYPE3
OFF
ON, OFF
OFF
ON, OFF
HDK-790GX 1403 VER1 (U)
Description, Remarks
Displays the lens extender state,and can be switching the
lens extender.
The lens file number is switched automatically according to
the model name obtained from the lens.
Refer to "5.2 Settings from the Menu [FILE SET]" for
usage method.
To match the zoom tracking DTL operation characteristics
with the lens zoom characteristics, set the time of the lens
used in the camera.
： Game tracking DTL is OFF.
OFF
C.PORTABLE ： Canon portable lens
C.STUDIO
： Canon studio lens
C.FIELD
： Canon field lens
F.PORTABLE ： Fujinon portable lens
F.STUDIO
： Fujinon studio lens
F.FIELD
： Fujinon field lens
Set by lens file (NO.1 to 8).
Set automatic switching of the aspect ratio converter (X0.8)
internal lens.
If set to ON, it operates in linked motion with the output
aspect ratio of the down converter to carry out automatic
switching.
Set whether to respond to the serial interface of the lens or not.
Sets the master gamma value.
The gamma value decreases in the direction of "-100" and
increases in the direction of "+100".
Sets the master pedestal value.
The pedestal value decreases in the direction of "-100" and
increases in the direction of "+100".
Sets the master flare value.
The flare value decreases in the direction of "-100" and
increases in the direction of "+100".
Sets the detail amount.
The detail amount decreases in the direction of "-100" and
increases in the direction of "+100".
Returns the settings changed with LEVEL ADJUST to the
state prior to change as a group.
Selects the type of gamma curve.
NORMAL
: Normal gamma curve
CUSTOM1-5 : Custom gamma curve
(Refer to "MENU(3/4)>CUSTOM GAMMA
DATA" for editing the custom gamma data.)
Changes the STEP GAIN step by step.
Possible to choose the time until convergence.
Changes the STEP ECC step by step.
Possible to choose the time until convergence.
There are independent settings for three channels of the
matrix, which can be switched.
Possible to increase the DTL level of the highlight part.
Sets the level value to be emphasized.
Level increases in the direction of +100.
Sets the upper limit for the emphasized DTD level.
The "-100" direction lowers the limit. The "+100" direction
raises the limit and lowers the DTL level.
SMOOTH KNEE is a function to adjust the compression
level of the brightness signal with KNEE. It can be selected
from the following three setting types.
TYPE1 : The compression rate of brightness is low.
TYPE2 : The compression rate of brightness is medium.
TYPE3 : The compression rate of brightness is high.
If the V filter of the DTL is ON, the resolution feeling in
direction V diminishes, making it possible to obtain an
image with less noise.
Can be turned on only when operating in 1080P29SF and
1080P25SF formats.
Can reduce resolution in the vertical direction.
MENU DATA
ALL
VF
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
Advertisement
Table of Contents
