Table of Contents
Advertisement
5.2 Settings from the Menu
Menu Confi guration and content
- - -
The following lists the camera menu con guration.
MENU (Simple Menu)
- - -
The simple menu is the same as MENU (1/4) described below. Refer to items in MENU (1/4) for details of each menu.
MENU (1/4)
Menu Item
VF DISPLAY
|
― VF ASPECT
| |
― SIDE MASK
|
― CONTRAST
|
― BRIGHT
| |
― SAFETY AREA
|
― SAFETY MARKER
| |
― CENTER MARKER
| |
― FRAME MARKER
|
― FOCUS INDICATE
| ― ZOOM INDICATE
VF DTL
|
|
― BOOST FREQ
| ― NOISE SUP
VF MODE
| |
― COLOR VF MODE
|
|
― VF VIDEO SELECT
|
― FRONT TALLY
FOCUS ASSIST
| |
|
― ASSIST AREA
| |
― TRIGGER
| |
― VF DOT BY DOT
|
|
― FOR RET
| |
― ASSIST DATA
| ― ASSIST DATA SETTING
| |
― AREA DISP TIME
| |
― AREA SIZE
|
― AREA LEVEL
| |
― AREA COLOR
|
― AREA MARKER
|
|
― EDGE BOOST LEVEL
| |
― EDGE COLOR
|
― STORE DATA
70
Initial
Setting value
setting
16:9
16:9, 4:3
ON-14:9, ON-13:9,
OFF
ON-4:3, OFF
50
0 to 100
60
0 to 100
ACTION
ACTION, TITLE
ON-16:9
ON-4:3, ON-16:9, OFF
OFF
ON
TYPE1, TYPE2, TYPE3
ON-16:9, ON-14:9,
OFF
ON-13:9, ON-4:3, OFF
ON
OFF, ON
ON
OFF, ON
10MHz, 15MHz,
10MHz
18MHz, 18MHzWIDE
5
0 to 10
AUTO
AUTO
Y
Y, R, G, B, R+G+B,
* 2
(R/G/B)
(R/G/B)
ENABLE
ENABLE, DISABLE
TRIGGER
TRIGGER ON,
ON
ALWAYS ON, OFF
FOCUS
FOCUS, FOCUS/ZOOM
UNLINK
UNLINK, LINK
ON
ON, OFF
NO.1
N0.1 to N0.4
0.0S to 5.0S
1.0S
(units of 0.5 sec)
15
1 to 100
60%
100% to 25%
MONO
MONO, COLOR, NEGA
OFF
ON, OFF
55
1 to 100
MONO, CYAN,
MONO
MAGENTA, YELLOW,
GREEN, RED, BLUE
---
N0.1 to N0.4
HDK-790GX 1403 VER1 (U)
Description, Remarks
Sets the VF aspect ratio.
Sets the side mask.
Adjusts the side mask contrast level.
Adjusts the side mask brightness level.
ACTION ： Area marker of 93% of the screen height and width.
TITLE ： Area marker of 89% of the screen height and width.
Sets the safety marker.
Sets the center marker.
Sets the frame marker.
Only active when using the serial lens.
Only active when using the serial lens.
Adjusts the overlap amount of the VF image focusing edge
signal (VF DTL).
Selects the frequency to be boosted.
Sets the removal level of the noise signal.
AUTO : Automatically recognizes the color VF to convert
the VF VIDEO signal to R/G/B output.
Sets the VF image output.
R/G/B can be set in case the color VF is mounted or when
the COLOR VF MODE is ON.
Sets active/inactive for VF FRONT TALLY.
Sets the ASSIST AREA display.
Select TRIGGER ON if you wish to display with the trigger
of lens operation, etc.
Trigger to display ASSIST AREA.
This setting is used when TRIGGER ON is selected.
Sets whether a control signal is sent to a VF having a DOT
BY DOT display function.
Sets whether to display the ASSIST AREA or not when
switching to the RET signal.
Selects the ASSIST DATA compiled in the ASSIST DATA
SETTING menu.
Sets the time from trigger detection until the focus assist
area is erased.
Sets the focus assist area range.
If set to "100", it is the entire screen domain.
Sets the image level of the ASSIST AREA.
Sets whether the ASSIST AREA image should be color,
monochrome or negative.
Sets whether the assist area frame marker is displayed nor not.
Sets the boost level of the edge signal.
Sets the color of the edge signal.
The contents set in the ASSIST DATA SETTING menu are
stored as ASSIST DATA. Select the numbers you wish to
store from No. 1 to No. 4 and write over the present data to
store them.
* 1
MENU DATA
ALL
VF
-
-
-
-
-
-
-
-
-
-
-
-
Advertisement
Table of Contents
