Ikegami HDK-790GX Operation Manual page 55

- - -
To Control Power ON/OFF from OCP (Remote Control)
You can control the power of the camera using the OCP.
5
Set the CCU MAIN POWER switch on the front of the CCU to "ON".
6
Set the CAM POWER switch on the OCP to "ON".
Note:
When the CAM POWER switch on the OCP is turned "ON/OFF", only power supply to the camera is turned "ON/OFF", and the CCU
power is not turned "ON/OFF".
OCP
CAM POWER switch
HDK-790GX 1403 VER1 (U)
3.3 Power Connection
43
3