Step Frequency; Modulation Type - Uniden UBC75XLT Owner's Manual

To turn off the 2-second delay, press Func + Dly while the
scanner is monitoring a channel, scanning, or searching.
disappears.

STEP FREQUENCY

You can change Step Frequency. The scanner have some
steps as 5.0/6.25/8.33/10.0/12.5/20.0 kHz and Default. Step
Frequency is applied in Quick Search, Custom Search, AIR
Service Search, and Close Call. Step Frequency is stored every
each Band Coverage.
1.
2.
3.
Notes :
•
•
•

MODULATION TYPE

You can change Modulation Type. Modulation Type
is applied in Quick Search, Custom Search, CB Service
Search, HAM Service Search, and Close Call. Modulation
Type is stored every each Band Coverage. And every
UBC75XLT_UB372BV_20130401.indd 45 UBC75XLT_UB372BV_20130401.indd 45
Press Func + Step, then indicates current Step
Frequency. And
Select a Channel Step by Scroll Control knob. (for AIR,
8.33kHz or 12.5kHz) (for 84 - 88 MHz in Band Plan 1 / for
84.015 - 87.295 MHz in Band Plan 2, 20kHz step is added)
Press E or scroll Control knob, then the Step Frequency
is inputted.
Press L/O or .Clr if you cancel this function when displays
Step Frequency.
If you wants to set default Step Frequency for current Band,
dEFULt
select ."
If the scanner is turned off , step frequency is set to initial
setting.
F
PGM
disappears,
45
DLY
appears.
2013/04/02 11:08:37 2013/04/02 11:08:37