Editing the Talk Group ID
[MENU]
Program System
Select a trunked system
Edit Group
Select a channel group
Edit Channel
Select the channel
Edit TGID
To edit the Talk Group ID, enter the Talk Group ID you want using the number
keys. Then press
Setting the Audio Type
For each channel, you can select the audio type that the channel receives.
[MENU]
Program System
Select the system
Edit Group
Select the channel group
Edit Channel
Select an existing channel
Set Audio Type
Select from All, Digital Only, Analog Only
All — The scanner automatically determines whether the audio is analog or
digital.
Digital Only — The scanner only remains on the channel if it is carrying APCO
25 digital audio
Analog Only — The scanner only remains on the channel if it is carrying analog
audio.
If you are programming a conventional system and select Analog Only, the
scanner prompts you to select the CTCSS/DCS tone setting. See the next section.
Selecting CTCSS/DCS Tones
To program a channel with a CTCSS or DCS setting, your conventional system
audio must be set to Analog Only first.
[MENU]
Program System
Select the system
F
F
F
F
F
F
F
.
F
F
F
F
F
F
F
F
F
F
Programming Your Scanner
MEL
MECL
C
87