Table of Contents
Advertisement
1. 6 St a n d a rd s
The AM4024(E) complies with the requirements of the following standards.
Table 3: Standards
T YPE
CE
Emission
Immission
Electrical Safety
Mechanical
Mechanical Dimensions
Environmental and
Climatic Humidity
Health Aspects
WEEE
RoHS 2
Vibration
(sinusoidal, operating)
Shock (operating)
Note:
Boards without conformal coating must not be exposed to a change of temperature which
can lead to condensation. Condensation may cause irreversible damage, especially when
the board is powered up again.
Kontron does not accept any responsibility for damage to products resulting from destruc-
tive environmental testing.
Please contact Kontron for assistance prior to performing further environmental testing of
the AM4024(E).
www.kontron.com
ASPECT
EN55022, EN61000-6-3, EN300386
EN55024, EN61000-6-2, EN300386
EN60950-1
IEEE 1101.10
IEC60068-2-78
Directive 2002/96/EC
Directive 2011/65/EU
GR-63-CORE
EN300019-2-3
IEC61131-2
IEC60068-2-6
EN300019-2-3
IEC61131-2
IEC60068-2-27
STANDARD
--
--
--
--
93% RH at 40 °C,
non-condensing
(see note below)
Waste electrical and electronic
equipment
Restriction of the use of certain
hazardous substances in electri-
cal and electronic equipment
5-150 [Hz] frequency range
1 [g] acceleration
1 [oct/min] sweep rate
10 sweeps/axis
3 directions: x, y, z
15 [g] acceleration
11 [ms] pulse duration
3 shocks per direction
5 [s] recovery time
6 directions, ±x, ±y, ±z
User Guide
AM4024(E)
TEST LEVEL
21
Advertisement
Table of Contents
