Connecting The Power Supply And Turning The Power Switch On And Off - YOKOGAWA MT300 Getting Started Manual

Digital manometer
Hide thumbs Also See for MT300:
Table of Contents

Advertisement

2.3
Connecting the Power Supply and Turning the
Power Switch On and Off
Before Connecting the Power Supply
Make sure to follow the warnings below when connecting the power supply. Failure to do so may
cause electric shock or damage to the instrument.
• First, ensure that the source voltage matches the rated supply voltage of the instrument
and that it is within the maximum rated voltage of the power cord you will use. Then
connect the power cord.
• Connect the power cord after checking that the power switch of the instrument is turned off.
• To prevent electric shock or fire, use the power cord for the instrument.
• To prevent electric shock, make sure to ground the instrument. Connect the power cord to
a three-prong power outlet with a protective earth terminal.
• Do not use an ungrounded extension cord. If you do, the instrument will not be grounded.
• If there is no AC outlet that is compatible with the power cord that you will be using and you
cannot ground the instrument, do not use the instrument.
French
• Assurez-vous que la tension d'alimentation correspond à la tension d'alimentation
nominale de l'appareil et qu'elle ne dépasse pas la plage de tension maximale du cordon
d'alimentation à utiliser.
• Brancher le cordon d'alimentation après avoir vérifié que l'interrupteur d'alimentation
principal de l'instrument est sur OFF.
• Pour éviter tout risque de choc électrique, utiliser exclusivement le cordon d'alimentation
prévu pour cet instrument.
• Pour éviter tout risque de choc électrique, l'instrument doit impérativement être relié à la
terre. Brancher le cordon d'alimentation sur une prise de courant à trois plots reliée à la
terre.
• Toujours utiliser une rallonge avec broche de mise à la terre, à défaut de quoi l'instrument
ne serait pas relié à la terre.
• Si une sortie CA conforme au câble d'alimentation fourni n'est pas disponible et que vous
ne pouvez pas relier l'instrument à la terre, ne l'utilisez pas.
IM MT300-02EN
WARNING
AVERTISSEMENT
1
2
3
4
5
6
App
Index
2-7

Advertisement

Table of Contents
loading

Table of Contents