Chapter 2: Installing the Switch
What to Prepare
for Installation
Installing the
Switch on a Wall
52
Figure 26. Incorrect Wall Installation
You need the following items to install the switch on a wall:
One FS980M switch
One set of brackets
Screws to attach the brackets to the switch
Two rubber feet (only for AT-FS980M/18PS, AT-FS980M/28,
and AT-FS980M/52 switches)
Four screws and anchors that hold the switch to the wall
Phillip-head screwdriver (not provided)
Pencil (not provided)
Note
A Phillip-head screwdriver and pencil are not included in the
shipping box.
Installation guidelines can be found in "Choosing a Site for the Switch" on
page 47.
To install the switch on a wall, perform the following procedure:
1. Place all the items from the packaging on a work table.
2. Orient the brackets against the sides of the switch and secure them to
the switch with the eight screws as shown in Figure 27 on page 53.