GS910/XST Series 10 Gigabit Ehternet Unmanaged Switch Installation and User's Guide
Unpacking the Switch
To unpack the GS910/XST series switch, perform the following procedure:
1. Remove all components from the shipping package.
Note
Store the packaging material in a safe location. You must use the
original shipping material if you need to return the unit to Allied
Telesis.
2. Place the switch on a level, secure surface.
3. Verify that the hardware components are included in your switch
package. Table 9 shows a list of the components.
Table 9. Contents in the Shipping Box
Item
One GS910/XST
GS910/10XST Switch
series switch
GS910/18XST Switch
GS910/26XST Switch
One AC power
cord
4. If any item is missing or damaged, contact your Allied Telesis sales
representative for assistance.
Image
Or
Or
36