Activating Manual Tilting - HEIDENHAIN ITNC 530 User Manual

Activating manual tilting

To select manual tilting, press the 3-D ROT soft key.
Use the arrow keys to move the highlight to the
Manual Operation menu item.
To activate manual tilting, press the ACTIVE soft key.
Use the arrow keys to position the highlight on the
desired rotary axis.
Enter the tilt angle.
To conclude entry, press the END key.
To reset the tilting function, set the desired operating modes in the
menu "Tilt working plane" to Inactive.
If the tilted working plane function is active and the TNC moves the
machine axes in accordance with the tilted axes, the status display
shows the symbol .
If you activate the "Tilt working plane" function for the Program Run
operating mode, the tilt angle entered in the menu becomes active in
the first block of the part program. If you use Cycle 19 WORKING PLANE
or the PLANE function in the machining program, the angle values
defined there are in effect. Angle values entered in the menu will be
overwritten.
HEIDENHAIN iTNC 530 79