Table of Contents
Advertisement
currently active. The following labels are used to specify the data location to be
reset/clear:
E.rEG
Reset total accumulating energy registers
d.rEG
Reset total extreme demand registers
tOU.E
Reset the Time-of-Use System energy registers
tOU.d
Reset the Time-of-Use System extreme demand registers
Cnt
Clear all counters
Lo.Hi
Clear Min/Max log
To reset/clear the desired data:
rSt
Ä From the central window, select the data location entry to
E.rEG
Ä Press
do
Ä
To quit the menu:
Ä From the central window, press
3.3.19 Password Protection Control
The
PASSWORD PROTECTION CONTROL
level. To enter the menu, select the
ENTER
.
The menu consists of 3 windows: the upper window is the menu label, the central
window lists setup parameters for setting the user password and enabling or
disabling the password checking, the lower window displays the current setup
configuration. When you enter the menu, the central window is currently active.
To view a password protection parameter:
Ä From the central window, select the desired entry with the up/down arrow keys.
To quit the menu:
Ä From the central window, press
3.3.19.1 Setting the Password
Ä From the central window, select the
54
be reset/clear with the up/down arrow keys.
to choose the lower window.
SELECT
Press and hold the hold the
until the
do
label is replaced with the
the key to return to the central window.
ENTER
to return to the
AccS
entry from the
ENTER
to return to the
PASS
ENTER
key for about 5 sec
done
MAIN
menu.
menu is visible only at the protected
MAIN
MAIN
menu.
entry with the arrow keys.
Operating The PM295
. Then release
menu and press
Advertisement
Table of Contents
