Table of Contents
Advertisement
To quit the sub-menu:
Ä From the central window, press
Viewing and Changing the Setpoint Delays
To enter the delay sub-menu , select in the upper window the
up/down arrow keys, then press the
definition, see Section 4.17.4. The following illustrations show the sub-menu
windows:
Setpoint
dEL
condition
sub-menu
Unit
1 S
To view the delay parameters:
Ä From the central window, scroll through the list of parameters with the up/down
arrow keys. The lower window displays the current parameter setup.
To change the delay unit:
Ä From the central window, select the
Ä Press
to choose the lower window.
SELECT
Ä Using the up/down arrow keys select
0.1 S
to specify delays in 0.1 second units.
Ä Press
ENTER
to return to the central window.
To change the delay value:
Ä From the central window, using the up/down arrow keys, select
the operate delay, or
Ä Press
SELECT
to move to the lower window.
Ä Adjust the delay value with the up/down arrow keys. The applicable range for
either delay is 0-9999.
Ä Press
ENTER
to return to the central window.
To quit the sub-menu:
Ä From the central window, press
50
ENTER
to return to the upper window.
SELECT
Setpoint
dEL
action
sub-menu
On d
0
entry with the up/down arrow keys.
Unit
1 S
to specify the release delay.
OFF d
to return to the upper window.
ENTER
dEL
key. For information on delay
Delay
dEL
sub-
menu
OFFd
0
to specify delays in second units, or
Operating The PM295
entry with the
to specify
On d
Advertisement
Table of Contents
